7/8 Shaft Vertical Pressure Washer Pump 3000 PSI @ 2.5 GPM Replacement Pump

  
(This pump will not fit the pressure washer with an idle down feature). Extended Durability & Adjustable Unloader? High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 150 hrs running time, longer than original power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. With adjustable unloader allows you to increase or reduce the pressure to fit the engine's requirement better.

This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more. This pump also fit for the front inlet/outlet engine, but you need to rotate the pump 180 degree and drill holes in the frame to install the pump. If this is difficult for you, please choose a front inlet/outlet pump directly. Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine.

Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible, Set up in 5-10 minutes! Homelite: 308653052, 308653006, 308653093, 308653078, 308653008, 308653036, 308653035, 308653026, 308653058. Ryobi: RY802900, RY802800, RY802723, RY8C2700, RY802700A. Husky: HU80709, HU80911, HU80709A, HU80911A. Craftsman: 580.752960, 580.752052, 580.752191, 580.752880.

Briggs & Stratton: 311553gs, 020441-0, 020442-0. What can you get from pressure washer pump?? Easy Start- Built-in for simple & quick cold starts to make the startup a breeze. 150hours Running Time - 6080hours longer service life than other pumps! OEM Technologies Pump - 2.3 GPM at up to 2900 PSI, fits most brand Vertical pressure washer pumps.

Troy Bilt, Generac, Briggs & Stratton, Craftsman, Simpson, Ryobi, Karcher, HondaGCV135, GXV140, GCV160, Blackmax, Powerstroke and fit most vercital engine at 5.5 6.5hp (170 200cc)? 7/8 Vertical Shaft pressure washer pumps? Such as25 308653045 UT80993 UT80993A HU80520 HU08 308653093 Note: From main center shaft to each mounting bolt is 4 inches; From center to center spacing between mounting bolts is 7 and 11/16 inches, 6 and 3/16 inches, 6 and 7/16 inches. Please do check the installation dimension in the product image to confirm if it is suitable for your pressure washer. Or you can send the detail information to us, we will confirm for you.

Please make sure that the pump shaft key and engine shaft are properly matched and there is no skew. Otherwise, the components will be damaged and the pump will be invalid. Please make sure your washing machine is? 2900PSI, a lower pressure washer may not be able to drive the pump.

Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays.

Thank you for shopping at our store.